# Network settings⁣⁣⁣⁣⁣

This section allows to assign an IP address or several addresses to the wired interface, the default gateway value can also be specified.

<figure><img src="/files/MhH02m3PgzjCYqk3yFlE" alt="" width="446"><figcaption></figcaption></figure>

Click the "Add IP address" button to add a new address. There are two ways to assign an IP address:

* Automatically - the IP address will be obtained automatically from the DHCP server.
* Manual - the IP address and netmask are specified manually.

The VLAN tag value can also be set in this section, the VLAN ID value should be in range from 1 to 4096.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.astrawireless.net/astra-wireless-documentation/technical-documentation/astra-quanta-technical-user-manual/operation-and-administration/network-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.