Maintenance
This section is used for firmware updates, operations with licenses and configuration. Allows to view extended information about the device, to reboot the device, reset factory settings, show system log and download diagnostic card in the bottom part of the screen.
The diagnostic card is necessary tool which helps to detect and solve an issue faster and more effective in situation then helps of Astra Wireless technical support team is required.

Device information
The following information is displayed on information panel:
Part number.
Device serial number.
Hardware platform version.
Time since last reboot.
Last reboot reason, following values are possible:
Software fault.
Unexpected restart.
Manual restart.
Manual delayed restart.
Firmware upgrade.
SNMP managed restart.
Test firmware loaded.
Watchdog.
Panic.
Web version.

Firmware
This section allows to view current firmware version and the build date, upload and download firmware file.
To update the firmware, a new version should be downloaded to your PC. Click on "Upload firmware" button and choose a firmware file. Or you can drag and drop a file from your file manager into the dotted area.
To download current firmware version from the device click the "Save" button.

Configuration
The device allows to upload, download and view current configuration in text form. To view the configuration, click the "Show configuration" button, the file will open in new window. To download the configuration, click the "Save configuration" button, the configuration can be loaded by clicking the "Upload configuration" button, or you can drag and drop a file from your file manager into the dotted area.

To upload and apply the configuration file that has been modified, please follow these steps:
Change the "check_sum <VALUE>" command to "check_sum off" in the configuration file.
Upload the configuration file to the device.
Refresh the web page by pressing F5.
To apply the settings, click "Changes" in the upper right corner and click "Apply" in the window that opens.
License
License contains information about allowed frequencies, channel width and power limit. This section allows to view the current license and upload a new one. To upload a license on device, click the "Upload license" button drag and drop a file from your file manager into the dotted area.

Last updated