> For the complete documentation index, see [llms.txt](https://wiki.astrawireless.net/astra-wireless-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.astrawireless.net/astra-wireless-documentation/technical-documentation/astrawireless-quanta-technical-user-manual/operation-and-administration/network-settings.md).

# Network settings⁣⁣⁣⁣⁣

This section allows to assign an IP address or several addresses to the wired interface, the default gateway value can also be specified.

<figure><img src="https://2734851754-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnG7V17JtC1mMJOmveKc6%2Fuploads%2FzM1yjVMgqF4C9948MZP7%2Fimage.png?alt=media&amp;token=a5250da6-8acf-46c0-9fa1-ff6554bc9a14" alt="" width="446"><figcaption></figcaption></figure>

Click the "Add IP address" button to add a new address. There are two ways to assign an IP address:

* Automatically - the IP address will be obtained automatically from the DHCP server.
* Manual - the IP address and netmask are specified manually.

The VLAN tag value can also be set in this section, the VLAN ID value should be in range from 1 to 4096.