> For the complete documentation index, see [llms.txt](https://wiki.astrawireless.net/astra-wireless-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.astrawireless.net/astra-wireless-documentation/technical-documentation/astrawireless-quasar-technical-user-manual/introduction/hardware-platform.md).

# Hardware Platform

### Wireless device <a href="#hardwareplatform-wirelessdevice" id="hardwareplatform-wirelessdevice"></a>

The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment can be used to create point-to-point wireless links at long distances. The wireless device is supplied in the following configurations:

* with removable integrated antenna 26 dBi (QSR5-26 / QSR6-26);
* with removable integrated antenna 29 dBi (QSR5-29 / QSR6-29​);
* connectorized (waveguide to coaxial adapter required) (QSR5-Ep / QSR6-Ep​).

<figure><img src="https://2734851754-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnG7V17JtC1mMJOmveKc6%2Fuploads%2F7r6CB0RG5xGaHwj9ICPh%2Fqsr%20for%20doc2.png?alt=media&amp;token=cd388231-2b90-429a-8018-b810b00f2d7a" alt=""><figcaption></figcaption></figure>

<figure><img src="https://2734851754-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnG7V17JtC1mMJOmveKc6%2Fuploads%2FjesLT9HVrfG4t4Nl27Dk%2Fqsr%20for%20doc.png?alt=media&amp;token=91ea9013-f900-4089-b95f-c46a2d201269" alt=""><figcaption></figcaption></figure>

The enclosure has 4 ports:

* 1x 2,5 Gigabit Ethernet port (10/100/1000/2,5G Base‑T), RJ‑45 connector: Data + Power.
* 1x 10 Gigabit SFP+ port: Data.
* 1x SYNC port - for connection external synchronization device\*.
* 1x DC IN port - for powering the device directly from a DC source.

{% hint style="warning" %}
NOTE

Power and wired statuses indication is performed via glassy plug of the cable gland for ETH, SFP and SYNC ports.
{% endhint %}

<table><thead><tr><th width="130.33333333333331">State</th><th width="172">Status</th><th>Description</th></tr></thead><tbody><tr><td>Flash</td><td>Initialization</td><td>The LEDs on ETH and SFP ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially.</td></tr><tr><td>Flash</td><td>Loading</td><td>Only for ETH port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue.</td></tr><tr><td>ON/Blue</td><td>Power</td><td>Only for ETH port.</td></tr><tr><td>ON/Green</td><td>Speed 1000 Mbps</td><td><br></td></tr><tr><td>ON/Light Blue</td><td>Speed 2500 Mbps</td><td>Only for ETH port.</td></tr><tr><td>ON/White</td><td>Speed 10000 Mbps</td><td>Only for SFP port.</td></tr><tr><td>ON/Green</td><td>ERConsole stage</td><td>Port with the established link lights up with green, the second port remains blue.</td></tr><tr><td>ON/Red</td><td>Speed 10 Mbps</td><td>Only for ETH port.</td></tr><tr><td>ON/Yellow</td><td>Speed 100 Mbps</td><td>Only for ETH port.</td></tr></tbody></table>

<figure><img src="https://2734851754-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnG7V17JtC1mMJOmveKc6%2Fuploads%2FmJYLgmIDytfufuXziryP%2Fqsr%20for%20doc1.png?alt=media&amp;token=bbb008df-9c5f-4225-ba11-2470d93283e2" alt=""><figcaption></figcaption></figure>

\*Pending.